PlanetZ forums - scopeusers.com

So all seems to be fine now..

as i wrote in the beginning of this Thread i already installed a small Fan on the right side of the PCP there seems to be a "slot" for a Fan.
But what i read as standard there is no Fan installed. Also i dindnt find any connector. So i soldered it on the Power supply ...

so i tried it now with a 18V stabilised power supply
It dont get Hot until now but only slightly warm.. that feels better but after some minutes all Clipping LEDs are glowing as before.
If i switch it off and on all LEDs are still on. If i switch it off for 5 miunutes the LEDs works normal as a ...

So the PSU is labeled with:

MPE ADAPTER AC/DC Type AT.15 In220 50Hz out 18V 2A

i checked the voltage with no load it has about 25V with A16 connected its at 21V

i will have a look @ home .. i think it is original.
Its AC / AC 18V 2A ?

yap .. it seems to be original.

but is there any thing about the LEDs ?

Hi,

has anyone an old blue A16 ?

I purchased one cheap one and it works fine but it gets very hot.
After disassembling the A16 i have seen that in the past there was a Fan installed. So i decided to mount a new fan on the right side and connect it to 7V from the internal power-supply.

But it ...

ableton is running in asio mode.
Are there asio midi drivers?

the xbase is connected on the usb interface in the same way as i connected it with scope.
I dindt see any loopback in ableton, the midi indicator was only blinking if i move a knob on push.
aslo the midi monitor in SFP was not fraking ...

hi..

if i use the scope midi port in my win 8 64bit system with ableton64 (9.1) i got strange MIDI problems.
The first i discovered was that the midi clock timing was total unusuable.
So i have used one of my usb midi interfaces.

now i was playing around with push and my xbase09. i mapped the ...

ohh .. i remember something like that .. this should be sticky or added in soniccore FAQ..
i really searched before asking here ..

great help & pasting !!
Thanx garry
its rocking again!

oh no !!!

my scope DAW worked better then ever..
with Win8 64bit, sfp 5.1 and ableton .

and i did it .. i installed the 8.1 update .. now my scopes don't want their drivers.
If i run the sfp setup as admin i get:

Found "Sonic Core Pulsar2"
ERROR: InstallDriver returned -2

...

Is there also a know bug with the MIDI device ?
Because i had massive problems with midi clock.
With a USB device it works without problems.

Hi .. im in the same situation .. Wave Dest is not working in win 64bit.

is there any workaround or fix out now ?

IN the two last songs since scope reanimation ..

ABleton Suite - analog - operator and sampler. nothing else .. as written before.
I also own and use Massive. but i dindt use it here. Also it doesent crackle more
if it is active.

But the crackels also appears by playing a wav only file in ...

thanks for all replys.

this evening im going to play again with the PC..
I will check the GFX again ..
It does not only happens if i move a scope mixer.
It also happens if i move a explorer window or the system information or the taskmanager.
THe Fancy gfx is off so i only move a small gray ...

thats what i have done a long time: fighting against crackeling without posting.

But i dont want to sell my pulsars. It should be my connection to the Hardwareworld.
with ADAT for recording from: Spectralis VIrusTI Xbase Blofeld Micron and FX.
Also it should be my very flexible FX rack for the ...

so again .. a bit testing..

spdif is now reconnected.
ADAT sync is superp i have no crackeling peaks on my mixer ..

i have tried sysinternals taskmanager. there are no spikes.. ableton uses 12 to 25 cpu and no other processes are
to find with it. Also checked Disk I/O and so on..

under XP it ...

so ..

i got same results with the dell and the AMD.

crackels. :(

with ableton and reaper..

im wondering about that if i go to abletons audio setting with Ulli at 3ms and select test-tone
with 80% CPU i dont get any crackels.. but if i play a Wave file with 0% cpu i got crackels.

same as on the ...

XP... naked.. Ableton .. one scope.. 12ms no crackel .. 4ms 48khz .. crackels ..

So XP and onboard audio with asio4all .. i got same crackels with lower settings then 16ms latency

i will try... but i dont think a broken pulsar will cause problems only if i scroll around in a window.. or if something pops up on the screen .. but lets see.

first i try installing xp now.. and only onboard audio with asio4all
i will report.