PlanetZ forums - scopeusers.com

Hey thanks for the reply. Yes I'm changing the sample rate within Scope and when I disconnect the A16 I still can't change the sample rate in Scope.

I can't seem to select a sample rate other than 44.1khz and hoping someone might be able to tell me why.

I'm running 3 x Scope cards with Scope v5.1 which is connected via an A16 mkII and PC is as below:

Intel i7 4790k
Gigabyte GA-H97-Gaming MB
16 gb ram
Windows 7 Home Premium

When I select a ...

Oops I'm in the wrong thread but thanks anyway Gary

So I've been down to my local computer store & they've offered me the following:

Intel i7 4790k
Gigabyte GA-H97-Gaming MB
Asus GeForce GT610 Silent 1 GB Graphics card
2 x 8GB Kingston DDR3 1600MHz RAM
SanDisk SDSSDHII-240G-Q25 Ultra II SSD
2 x WD Blue WD10EZEX 1 TB Hard drives
Windows 7 Home ...

Aah yes well in my world Gary it's hard to know when I've reached the final mix stage. I don't do it for a living & I flit between projects with arrangements always subject to change. I only know a project is complete in hindsight ie when I find I haven't returned to it for a while & I've more or ...

Thanks for the response & tips Gary. The projects on the new machine will include heavier duty instrument plugins like piano samples which I have difficulty running at all at the moment. So I'm hoping I can run more of those sorts of things while achieving a 3ms latency at the same time.

I'm looking to upgrade from an XP 32 bit system with Intel Core 2 6600 @ 2.4 GHz & 2 GB ram on which I have a Pulsar 1 & a Pulsar 2 card to a 64 bit system with something like an i7 & 32 GB of ram. One thing I'd like to be confident of with the new system is that I can leave the ULLI at minimum ...

No, definitely StereoPan

I load the StereoPan tool into a stereo channel of the STM 2448 and the volume drops Can anyone tell me why please? I don't remember this happening before

Cheers

Can you tell us the software version the cards come with? Will you separate the cards & if so which software comes with each?

Cheers

Thanks again Gary. And of course you're right.

I fed the monitor outputs into a compressor (which contributes nothing other than to get the monitor bus working) &, hey presto, suddenly I can listen to the bus, which, as has been noted elsewhere on these forums, has the panning reversed.

I hope at ...

Hey thanks for taking the time to answer Gary.

Yes I'm using the recording busses for the record signal.

I guess my question was why don't I hear the monitor buss when I enable the monitor button in the control room section of the desk? I would have thought it doesn't rely on having anything ...

This is probably a stupid question but I'm having difficulty with monitoring in the STM 2448 desk.

I have connected my analogue destination to the control room outs. I have run the mix out back through a channel input, disabling the mix buton so it doesn't feed back. On that channel I have enabled ...

Ok so I'm 15 hours ahead of you Gary. What's your best time timeframe?

That's very generous of you Gary. I'm located in Australia so I'm not sure what's best timewise for you but skype is probably a good way to do it.

What time zone are you in?

Ok thanks for that stardust. I have an Asus P5b-e & can't reduce the latency to 13 ms so it's obviously not a decent mainboard.

Actually that's not the only problem I have with the Pulsar on this mb so I wouldn't recommend it.

I need to buy a new keyboard & I'm thinking if I buy a midi controller connected via usb I may solve the latency problem I have with my Pulsar 1 which is 25 ms.

Would I be correct?

And can the keyboard midi connection appear in Scope?

This may not be the forum to be asking this but it's one of the more reliable forums. I'm running XP Home with 2G RAM & as I load plugins into Cubase I get to a point where windows task mngr tells me I have more than 600MG of available memory but I can't load anymore plugins/samples/instruments ...

There are instances where the workaround isn't very satisfactory like when the master you want to record involves skipping a sectn in the sequencer program (I use Cubase). I need to do this fairly regularly as I run off different vsns of tracks.

I'd be soooo grateful if anyone can prov a solution ...

Thanks pollux. Yes the Focusrite Octopre LE looks like a really nice piece of gear with some excellent reviews.

I