PlanetZ forums - scopeusers.com

Hi

I will describe my Scope 7 setup to begin with...

Scope 7 is working on a Desktop PC and running 3 Pci cards Luna, Pulsar 2, Scope/Sp
The three cards is installed in ASUS TUF H310-PLUS GAMING motherboard

As for DAW, the setup is a Lenovo Legion Y530 Laptop that communicates with Scope 7 via ...

THANK'S For that

Hi garyb

I think you just unplug some repeating behavior i kind of I adopted by "Save and then quiet DAW" while the project is running, just now i tried to first close the project then exit the DAW Bitwig in this case and reopen NO error :)

Also in Cubase 9.5 no error and please leave out 10 this ...

Hey k500zm

Yes at first i did found that my Cubase 10 is not closing properly or shutdown properly, last SAVE did not appear but since Cubase Pro 10 as more than this in bugs...i tried Cubase 9.5 witch is great also Ableton Live 10 and recent buy of Bitwig the all close ok and last save is in the ...

Hi k500zm

As for crackles i have none, seems i can work with a good load of VST in my DAW with 512 buffer size ( 13 ms ULLI at 44.100 )

As for problems, i can point a few flows!

1 - When i exit my DAW ( Live 10, Cubase Pro 10/9.5, or Bitwig ) and open again one of the DAW's i receive this message ...

Hi

Finally i received the modified BIOS from Asus, i see no different, still 11 Master Vereb and Pci Limit.

I'm attaching the modified BIOS maybe it can help.

I'm wondering if it is to make a change what would it be.....

Best,

Hello

My Scope 7 setup is 3 PCI cards on Asus tuf h310 plus gaming, everything is ok at 44.100 and 256 buffer size and rocking 12 masterverb in an empty project.

I was searching in bios the "PCI Latency Timer" setting and there is no user option to set it up, so reached Asus support and the say I ...

Hello

for Motherboard Future Prof my 3 PCI cards and Scope Platform I intend to back up my Studio pc by keeping extra hardware, I'm now in a setup compiled with the flowing :

Asus TUF h310-plus gaming
i7 8700k
16 gig DDR4 ram
And NvMe SSD drive.

AND 3 PCI cards: "Luna + Pulsar 2 + Scope/SP"

It ...

Hi next to nothing

I believe i'm up and running now, last error message was DSP limit reach and if would like to optimize the project so i did and all ok after that :)

As for the H310, i'm all ears for a better configuration even if it means to step back in CPU gan but won't step back from 3 PCI ...

Hi Gary

I read an old post from you in our forum about a way to determine Scope/sp 15 DSP gen, you wrote..

"you can look at manufacture dates, but if the card has a z-link, Plus or Classic20 i/o plate, it's almost certainly a 2nd gen card. if iut has a 24ADAT or was converted from a 24ADAT plate ...

Hi

I want to sure a theory, at first i need to know if a PCI-Overflow being triggered by the Asio module?

If the answer is yes or the biggest trigger to PCI-Overflow then i can take this "RME digiface usb" and use it as Asio driver and send 32 ch via ADAT..

Is it sound good as i think ? in terms ...

Hi Gary

Thanks for clearing out master thing, i still got the question if Luna is the first generation?
And if Scope/sp 15 DSP is also the first generation?

This will help me focus on my stability...

+ From Scope 5 manual i can see that different Asio module double the number of channels used on ...

Hi Bud

Can it be an option to work with Scope 5 and leave some of the problems?
i mean like old system old card or it absolutely relies on the hardware side?

Best,

And sorry again z390....i meant z370....leave this aside, please. :)

+ Totaly get you about outdated, again sorry but this must work :) there is a way I'm sure, and getting closer.... with this H310 chipset.

Please read above this is more relevant,,,,:) even more relevant is that i have no reason ...

Hi Bud

Sorry for my confusion,

Yes, the fresh install is on A NvMe SSD M.2, this was working for almost two days! as for now, i managed to set 3 cards again no change to the M.2 NvMe SSD, and no Overflow....at first of all one key change i made is lowered the ASIO to 32 ch!
BUT Now please see this ...

Hi

Can it be that high asio port causing my PCI to overflow?

I have just lowered it to 32 from 64 and no message......

Update, now that i take out the Scope/sp out of the system the message didn't appear!

Now this system compiled with 2 Luna cards and one Pulsar 2 card, why this 15 DSP card causing so much trouble?
All my new build around this Asus Motherboard was to have 3 PCI slots before i was working with a ...

Hi

No metter what i do i keep receiving the PCI-Master-Overflow!

This is my Motherboard: Asus TUF H310-PLUS GAMING.

With CPU as a graphic adapter or with Nvidia card, with Nvme no Nvme or even with 2.5 SSD

for a day and half, everything was working great then i closed scope 7 reopen Scope 7 and ...

Hi

Please if anyone see this i must know :)

Now that i cleared some mess around my, screws drivers and HDDs :) i realized that i left the second STDM cable out, so at the moment my 3 PCI cards are connected with one STDM cable, from Lune to Pulsar 2 to Scope/Sp

Can it be a possibility that all ...

Hi

Thanks for the reply.

Ok just made a fresh install of win10 on Nvme hdd and loaded same vst plugins to a project and no PCI bandwidth message :)

I left the project on loop for about 20 mintes and came back and he is playeing witout messages :)

Cross my fingers now.

What else can do to check ...