Please, give me a hand to register, Creamware site doesn't w

Nestor · Post by **Nestor** » Sat Mar 12, 2005 4:50 pm

Hello there people!

Well, it is LATE, but it is my time to install the last version of SCOPE. The problem is that I don't get the email with the key to unclose it...

It is a very simple process, I login and then go to the "Get SCOPE 4.0" page, then go to "OK" for the confirmation (Show Boards), then to "Your activation codes will be sent via e-mail to this address:... Please check if your e-mail address is correct. If it is not, please first go to "my profile" and correct it. You can request your 4.0 key only once per board and you get your activation codes via e-mail only.", I say "OK", but unfortunatelly appears the following message:

Your activation codes are now sent via e-mail to this address:
blabla@blabla.com An error occured while sending your codes! Please try again"

If any of you has experienced this problem, please help me getting the key, I need to start working soon in new projets and is now or never to install the new version, CHEERS...

Nestor · Post by **Nestor** » Sat Mar 12, 2005 4:53 pm

BTW, I have insisted about 30 times now...

Post by **hubird** » Sat Mar 12, 2005 7:47 pm

Hi Nestor, still alive?
try Ralf, rb-at-creamware.de
he's very helpfull, and fast!

Nestor · Post by **Nestor** » Sat Mar 12, 2005 8:16 pm

I has been alwyas alive

, the only matter was that I have been extra busy for quite a few monts... I am soon comming back, at last...

Thanks for the tip, there I go!

kensuguro · Post by **kensuguro** » Sat Mar 12, 2005 10:51 pm

Hey! Long time no see! It's great to see you around again. So how's life?

Nestor · Post by **Nestor** » Sun Mar 13, 2005 3:03 pm

Hi Ken, how are you man!

Well, thigs have been a little complicated lately, no much money and some silly problems similar to those of yours in USA about legal papers and the so ... but with effort my wife and I are moving foward to a better life.

We both are studying much Multimedia matters and slowly getting there...

What about you Ken? How's life in there? Are you happy and learning what you spected to leran? I hope so!

Nice to start miting you all again

borg · Post by **borg** » Sun Mar 13, 2005 3:21 pm

hey, good to have you around again, nestor! and still with good hopes, as always!

well, i hope for you to start playing with scope 4 soon. i'm in the process of cleaning up my computer, which means going back to old projects (on long-not-used partitions). i like 4 much better than SFP 3. faster and somehow looks cleaner. although the changes are small, it felt like going back in time way too far. btw, does anyone of us oldtime users remember the pulsar2v times?

even then my WOW experience was big.

Nestor · Post by **Nestor** » Sun Mar 13, 2005 3:42 pm

Hey Borg!

Yeaa, I still have the disk of v1.1, can't forget it... it was sort of a mystical experience when I first opend up Pulsar in the screen... Magical pleasure

Post by **hubird** » Sun Mar 13, 2005 7:58 pm

........ 'I like the first beta version most'

Nestor · Post by **Nestor** » Sun Mar 13, 2005 9:29 pm

Are you kidding, do you have it?

Post by **hubird** » Sun Mar 13, 2005 9:41 pm

no, it's just side walk talk, with some logic

ChrisWerner · Post by **ChrisWerner** » Mon Mar 14, 2005 3:43 am

Another day, another welcome.
Glad you´ve found the way back in here.
I´ve missed the positive vibes that come with you.
I wish you and your wife that everything will develop in a success.

Maybe I´ll listen to our competition tracks again, to imagine your wife laughing about your voice

Well, see you around here...

EDIT: I am still on 3.1c is it really such a worth to update to version 4?

<font size=-1>[ This Message was edited by: ChrisWerner on 2005-03-14 03:44 ]</font>

Ralf · Post by **Ralf** » Mon Mar 14, 2005 5:19 pm

Hello Nestor,

please send me your hardwareserialnumber and a little note, that you need the Scope4.0 activation, to my office mailaccount:
rb@creamware.de

I will generate the key four you and send it by manually.

cheers
ralf

On 2005-03-12 16:50, Nestor wrote:
Hello there people!

Well, it is LATE, but it is my time to install the last version of SCOPE. The problem is that I don't get the email with the key to unclose it...

It is a very simple process, I login and then go to the "Get SCOPE 4.0" page, then go to "OK" for the confirmation (Show Boards), then to "Your activation codes will be sent via e-mail to this address:... Please check if your e-mail address is correct. If it is not, please first go to "my profile" and correct it. You can request your 4.0 key only once per board and you get your activation codes via e-mail only.", I say "OK", but unfortunatelly appears the following message:

Your activation codes are now sent via e-mail to this address:
blabla@blabla.com An error occured while sending your codes! Please try again"

If any of you has experienced this problem, please help me getting the key, I need to start working soon in new projets and is now or never to install the new version, CHEERS...

Ralf · Post by **Ralf** » Mon Mar 14, 2005 5:21 pm

Thank you for the flowers

)

ralf

On 2005-03-12 19:47, hubird wrote:
Hi Nestor, still alive?
try Ralf, rb-at-creamware.de
he's very helpfull, and fast!

Nestor · Post by **Nestor** » Tue Mar 15, 2005 12:35 pm

Well, it seems those flawers are yours in fact... Thanks for the mail address, a mail has been send to you asking for it, CHEERS!

Nestor · Post by **Nestor** » Wed Mar 16, 2005 12:01 pm

Got it!
Thank you!