MS Example (mid-side enc/dec)

alfonso · Post by **alfonso** » Sat Feb 25, 2006 4:46 pm

<a name="planetz-file"></a><a href="http://www.planetz.com/Pulsar/files/mod ... .zip"><img src="/forums/images/file_icon.gif" border="0" alt=" File"> File</a> <a name="planetz-tag"></a>Type: Effect <a name="planetz-tag"></a>Pulsar Version: SFP 3.1 <a name="planetz-tag"></a>Requires: Modular 3 _____________________________________ Here is an example on how you can encode a stereo signal to M/S, process the result and decode back to stereo.

I kept the sections clearly separated and I've put everything in an 8x8 modular, so you can patch the inner circuits to stuff outside.

The decoder section can be used to bring back to stereo 2 microphones used in M/S configuration...

I didn't put any delay to phase compensate the eventual processes as there is in the insert device i posted in the devices section, but the purpose of this patch is just to be a start point. <a name="planetz-fileimage"></a><IMG SRC="http://www.planetz.com/Pulsar/files/mod ... xample.JPG" BORDER="0">

Shroomz~> · Post by **Shroomz~>** » Sun Feb 26, 2006 2:30 am

Someone's been busy

I'll try this today. Is this the same architecture as your MS slot insert?

Cheers

alfonso · Post by **alfonso** » Sun Feb 26, 2006 2:58 am

Is this the same architecture as your MS slot insert?

Cheers

Except for the missing delay after the inserts it's exactly the same.