2x1/1x2 bypass switches for Modular

johnbowen · Post by **johnbowen** » Thu Jan 19, 2006 6:02 pm

<a name="planetz-file"></a><a href="http://www.planetz.com/Pulsar/files/mod ... .zip"><img src="/forums/images/file_icon.gif" border="0" alt=" File"> File</a> <a name="planetz-tag"></a>Type: Synth <a name="planetz-tag"></a>Pulsar Version: SFP 3.1 <a name="planetz-tag"></a>Requires: Modular 2 _____________________________________ I have posted a new Zip with with 4 variations (also in the Devices area). The bypass switches will now remember their button state (obviously, not the Momentary ones

)

http://www.planetz.com/forums/viewtopic ... t=0#135034

cheers,
john bowen
zarg music

[ This Message was edited by: johnbowen on 2006-06-17 00:21 ]

Lima · Post by **Lima** » Sat Jan 21, 2006 10:33 am

Thanks John!

ChrisWerner · Post by **ChrisWerner** » Tue Jun 06, 2006 12:30 pm

Thank you, I find them very useful.
One question though.

Is the actual state of the bypass button stored when I save a preset.

Maybe it is an modularIII related problem or a scope 3.1c software problem in general?

Anyway when I reload a preset the actual state of the bypass buttons aren´t correct.

[ This Message was edited by: ChrisWerner on 2006-06-06 13:30 ]

dawman · Post by **dawman** » Tue Jun 06, 2006 5:00 pm

John,
This has been an exciting week 4 me as I am now getting help everywhere I go, as these people can tell, I will not stop asking questions ever!! Solaris/Flexor/Modular is my dream come true conversion platform from my analog rig which will recieve proper burial in my studio.
I now witnessed an analog emu done in modular. It is very acurate, and an awesome example of explanation with the text bars in place of poteniometers, and switches.
Your switches came at the right time as I now understand their purpose. Thank You 4 being the best business model I've ever witnessed. Guys like you should be in the DSP Hall Of Fame. It must be nice to know that your name will be remembered for 100's of years to come. A modern day Achilles. Most likely will discover a ligament in the human finger and call it the Bowen ligament, only noticable in concert pianists and people who spend way too much time on their synthesizers.

Don't Go Changin',

_________________
Jimmy V.

[ This Message was edited by: scope4live on 2006-06-06 18:01 ]

johnbowen · Post by **johnbowen** » Tue Jun 06, 2006 7:38 pm

Is the actual state of the bypass button stored when I save a preset?

Maybe it is an modularIII related problem or a scope 3.1c software problem in general?

Anyway when I reload a preset the actual state of the bypass buttons aren´t correct.

Chris,
I will check this...

cheers,
John b.

ChrisWerner · Post by **ChrisWerner** » Thu Jun 15, 2006 10:30 pm

Any success, John?
Thank you.

johnbowen · Post by **johnbowen** » Fri Jun 16, 2006 11:25 pm

Any success, John?

Hi Chris,

OK, the button states for the two bypass switches are now stored in presets. I've replaced the file online here.

Sorry 'bout that!

regards,
john b.

[ This Message was edited by: johnbowen on 2006-06-17 00:26 ]

dawman · Post by **dawman** » Sun Jun 18, 2006 9:14 am

My Oberheim clone is having a problem with the on/off switches state. The one that controls SAW drift sometomes works, and sometimes not. Is this the same situatiuon?
If I download the file above it should apply to the 2 x 1's only?

ChrisWerner · Post by **ChrisWerner** » Sun Jun 18, 2006 10:31 am

Yep, the on/off switch is a stock creamware module. There will be no change with Johns new switches on it.

As a work around you could replace the on/off switch with a 4x1 switch and connect slot 1 and 3, or 2 and 4 with the random signal genarator. Leaving the other two slots free should work like an on/off switch, too.

[ This Message was edited by: ChrisWerner on 2006-06-18 11:34 ]