I just bought a pulsar package and I have a serial/registra

costi_studio · Post by **costi_studio** » Wed Oct 04, 2006 7:13 am

I just bought on ebay a pulsar package and I have a serial/registration issue!!! The package contains 2 x Pulsar II cards and 2 x Luna cards. I arranged the transfer of registration. When I entered in my creamware account I found this:

Activation Keys

Hardware Serial Number Device Activation Key
3F8L10T0Z(Pulsar II) Effects Package I B21W0YGTX6GZ
" Main Studiotools Package 51E60ZRCTMX1
" Poison FM YRCM01L6B172
" Pulsar Application 540R0G2BFH3H
" SCOPE 4.0 Software YY140K1YF105
" SCOPE Fusion Platform RFB40XRW9ZF8
" STS-2000P 15T60AT221Z5
" Synthesizer Package I 5EZ1026CBAAH
" Synthesizer Package II MXK202EWH04M
" Volkszämpler SFP C3X8085K21ZH

AH0T70B08(Luna) Luna Software T5LF0BK9BK6C
" SCOPE 4.0 Software TAL10ABX07XM
" SCOPE Fusion Platform AGK20X8376XM

MLW5T010Y(Luna) Luna Software CL2B09KYELC2
" Luna Software V3 1BH400167KWM
" Main Studiotools Package WMW20AWE9Y1H
" SCOPE 4.0 Software C1L60F8GKW34
" SCOPE Fusion Platform CH1F01K31EEC
" Volkszämpler SFP EZ87026HA5KC

TK3XC0L06(Pulsar II) Effects Package I 26YF007MWYM8
" Effects Package II BZGM037FYBWC
" Main Studiotools Package MF7000YTC048
" Mixer Package I 1GFC0RG7ECF4
" Modular V2 F5630XX27TX1
" Poison FM 61CT0K8CTBX5
" Pulsar Application FKWZ01X53Z7B
" Pulsar ProPack 28130B4K1ZXH
" SCOPE 4.0 Software 18600E5GGE7M
" SCOPE Fusion Platform TAB70135XH23
" STS-2000P 4A010ZW3G2WZ
" STS-3000 CG3Y02360LRR
" Synthesizer Package I YGEC019FXX2X
" Synthesizer Package II K0YC01RC72MX
" Volkszämpler SFP 554L0MTM42L5

The seller didn't email me any information about this and now he don't responde to my emails...

I am new to Pulsar so I have some questions:

These are the plugs that I have with the cards? If so can I download these plugs from creamware site, the seller gave me a CD with the software but I didn't find all the plugs that appers on the registration page.

Also can you tell me what plugs contain the Synthesizer Package II and Effects Package II ? The creamware site is so confuse.

Sorry for all that questions but I will like to start the "scoping" very fast. Thanks

tgstgs · Post by **tgstgs** » Wed Oct 04, 2006 7:39 am

wellcome

Download scope 4.5 from CWaudio
On install use Scope professional and type in the keys you have;
or mail CWAudio to get a allkeys file whitch you then can import;
hope this helps

good vibes from vienna

ali · Post by **ali** » Wed Oct 04, 2006 7:56 am

Effects Package 2:
DC-Filter, Deesser, Ducker, Ducking Delay, MasterChorus,MasterFlanger, MidiPole Filter, MidiTremolo, PatternDelay, RandomFlanger, SoftClip, SpaceFlanger, SSB ModDelay, SSB Modulator, SSB Phaser, StepFlanger
Stereo Expander, Tube Drive, TQ Drive, Vocoder III

Synthesizer Package 2:
Arpeg 01, Inferno, Lightwave, Prisma

costi_studio · Post by **costi_studio** » Wed Oct 04, 2006 9:04 am

Thanks for the info. I have the 4.0 version. So the plugs that are in my creamware account are the plugs that I have to have, but why don't appear in my system, Do I have to make something else? I loaded the the serial keys but for example the Modular v2 is shown in the panel but doesn't load.
Thanks

ali · Post by **ali** » Wed Oct 04, 2006 10:49 am

the best thing to do is to contact ralf with your SNs at the following email rb@creamware.de

request he send the allkeyfile for the cards.

this way you would import during installation and you don't miss a device.

what card do you have installed??

you only have Mod 2 for the Pulsar II so this card must be in the system

<font size=-1>[ This Message was edited by: ali on 2006-10-04 11:51 ]</font>