has any1 got the Recording Mixer Dev from Luna3?

Akuma · Post by **Akuma** » Thu Sep 26, 2002 11:54 am

its basically the big recording mixer, I dont want to have to install my old CD as I have had my Hard Drive reformatted again and dont want stuff being put into the registry, if so, could you please post or send it to my email which is remiansari@email.com

I would be very grateful if you could.

alfonso · Post by **alfonso** » Fri Sep 27, 2002 7:15 am

isn't it available from the installation files without installing? it should.....

Akuma · Post by **Akuma** » Fri Sep 27, 2002 11:00 am

I deleted the Installation File for Luna 3, I only have 3.1 now, and the Mixers are not the ones that I had. If you remember it was the Big Recording Mixer whereby it had 4AUX send and I think 3 Inserts. If you have it please send it. I have the Luna2 installation CD, however to get the Recording device would require a full installation of the Luna2 drivers, copying the Device over and reinstalling Luna 3.

marcuspocus · Post by **marcuspocus** » Fri Sep 27, 2002 11:24 am

The STM1632 is doing all of this and better? Why do you need the old crappy mixer? Maybe you have a good reason, i just don't know ?

Akuma · Post by **Akuma** » Fri Sep 27, 2002 5:37 pm

Because when I wrote some tunes, I had all the volume levels setup and effects plugins being run etc, various stuff etc, and it was setup in a way so that If I ever wanted to record again, I wouldnt have to mess around with levels and all.

at0m · Post by **at0m** » Fri Sep 27, 2002 9:18 pm

I think Sandrob has the old mixers online somewhere, but i can't see where for now. Anyone else?

alfonso · Post by **alfonso** » Sat Sep 28, 2002 1:13 am

Recording Mixer travelling just now!
but hei akuma, spend a spare hour to set 1632 for recording, you'll not regret....

sandrob · Post by **sandrob** » Sat Sep 28, 2002 7:38 am

only micro and dyna mixers are on-line.
i have pulsar's instalation (with activation key) for rm242 but i don't use that mixer anymore.
i can instal rm242 again and send device to you, but i don't know it will work!?

Akuma · Post by **Akuma** » Sat Sep 28, 2002 8:51 am

Hi. Thanks Alfonso for the Mixer very grateful. But I just released something, the RM242 I was using was Version 2. :S Have you got that one by chance? Only in V2 when you click on the Arrow button to link 2 channels together, you were thne able to use Stereo Insert effects! Compared with this one whereby even though you link them, you had to run 2 Mono inserts one for left & right.

Also another reason why I will be still using this mixer is because it uses less DSP than the STM.

at0m · Post by **at0m** » Sat Sep 28, 2002 11:11 am

http://users.pandora.be/at0m/sfp/RM242.dev

won't be on too long though. And it may be that I saved the device w loads off CC# for remote. You could remove them if desired.

Chill69 · Post by **Chill69** » Sat Sep 28, 2002 1:07 pm

Speaking of mixers and the Luna, did creamware ever release an extremely low footprint mixer for SFP? The big mixer is nice, but I never end up using all of it, maybe only 3-4 Channels (I do a lot of track bouncing so I can run more synths / effects), and something that will allow me to use more DSP for other things would be of great help.

Chris

at0m · Post by **at0m** » Sat Sep 28, 2002 1:36 pm

Of course. Try STM1632 (my personal favorite), or even Dynamixer and Micromixer.
Both have # channels from 4->16, Dynamixer has 2 insert slots, Micromixer has no insert slots. Both DynaMixer and Micromixer don't have Aux -but I think that's not a real problem on 4 channels. If you still want Aux on those, be creative with the Matrix. I don't remember who made it, think it's j9k.

Also Celmo and Spacef have 4-6 channel mixers with an insert slot, 2 Aux, etc. They're Pulsar OS 2.04 devices, but seem to work fine under SFP. Check their websites for more info.

Akuma · Post by **Akuma** » Sat Sep 28, 2002 4:50 pm

Hi Atomic. The file link you gave isnt the Mixer. Its way too big to be the one and also it asks for a Reg key so I assume its a Super Version for Pulsar users. There was a RM242 that came free with the Luna 3 installation and I havent got it anymore, so if anyone who has 3.0 please please send me the RM242 v2 Mixer. I had a whole load of setting and insert effects like compressors etc when I recorded my music and to go thru and set it up again would be a nitemare!

at0m · Post by **at0m** » Sat Sep 28, 2002 4:54 pm

It got big by presets and midi CC#.

I'm not sure, but I think you'l have to give a key for any RM242 you'd receive, just like we had to when we bought it from the shop.

alfonso · Post by **alfonso** » Sat Sep 28, 2002 6:09 pm

sorry akuma, but this is the only one i've got.