High end plugins
-
- Posts: 138
- Joined: Mon Aug 20, 2001 4:00 pm
I just hope SPL makes more plugins, for example a Creamware DSP-based SPL Vitalizer would make me squirm with excitement.
Then there is the Quantec Yardstick that Quantec has been ready to release for awhile but waited longer once the copy protection scheme was compromised...
I doubt TC will do anything for the platform for quite some time, at least until their PowerCore flops. (Not that it will...) If their plugins are anything like the TC Native stuff then I wouldn't want it anyway
But if more like their hardware (M2000 or higher, D-Two, etc), then I'd be all over it.
Then there is the Quantec Yardstick that Quantec has been ready to release for awhile but waited longer once the copy protection scheme was compromised...
I doubt TC will do anything for the platform for quite some time, at least until their PowerCore flops. (Not that it will...) If their plugins are anything like the TC Native stuff then I wouldn't want it anyway

-
- Posts: 138
- Joined: Mon Aug 20, 2001 4:00 pm
I know this isn't the place to discuss this but, Seth, you should come check out my SPL rack if you're ever in Southern California. I've got the Vitalizer Jack, Machine Head, Charisma-8 & Charisma-2 (though I doubt I'll keep the 8 now that I just got the 2), & Dynamaxx, not to mention the Attacker on Pulsar. Great, great stuff & the Machine Head (which is probably the best of the bunch) is all DSP's, anyway, so ought to be the next one available.
I'm sure a virtual Machine Head wouldn't be as cheap as Transient Designer, though, as it retails for about 4x the hardware Transient Designer. Anyone else have doubts about a $1k Pulsar plug-in doing very well?
I'm sure a virtual Machine Head wouldn't be as cheap as Transient Designer, though, as it retails for about 4x the hardware Transient Designer. Anyone else have doubts about a $1k Pulsar plug-in doing very well?

-
- Posts: 1139
- Joined: Tue Apr 03, 2001 4:00 pm
- Location: Tennessee, USA
- Contact:
-
- Posts: 138
- Joined: Mon Aug 20, 2001 4:00 pm
There are 3 reasons why there is'nt more high end plug-ins.
1. The platform is to small.
2. Politics. It seems to me like Waves for one has some agreement with Digidesign not to release their Plugs for a competing system. I don't know this but it's a feeling i have.
3. PIRACY. Like stated above, Quantec have a killer reverb for Pulsar but won't release it because of the copy protection (or lack of) on the Creamware cards.
BTW. There must be a fool proof copy protection. There must be. I have some ideas on how it can be done but i'm not sure. I've read some on how they crack the devices but there mist be a way around it, i'm sure.
1. The platform is to small.
2. Politics. It seems to me like Waves for one has some agreement with Digidesign not to release their Plugs for a competing system. I don't know this but it's a feeling i have.
3. PIRACY. Like stated above, Quantec have a killer reverb for Pulsar but won't release it because of the copy protection (or lack of) on the Creamware cards.
BTW. There must be a fool proof copy protection. There must be. I have some ideas on how it can be done but i'm not sure. I've read some on how they crack the devices but there mist be a way around it, i'm sure.
It should be possible to encode copyrighted devices by it's developer with a public/private key encryption key where the public key is the one known by developers and the private key is burned inside a chip which is different for every card and unreadable by others.
This way a copyrighted device always should be generate per person and is always unique. This technique also will get rid of the cumbersome serial numbers.
This way a copyrighted device always should be generate per person and is always unique. This technique also will get rid of the cumbersome serial numbers.
All the unique keys in the world will not do any good when the crackers just alter the program to say "yes, the key is correct"
I think you might be able to do it by having a value in the DSP code which is different for each user, the device can work in demo mode (beep or something) or not work at all depending on the developer.
the developers would have to make a different copy of the device for each user though.
I think you might be able to do it by having a value in the DSP code which is different for each user, the device can work in demo mode (beep or something) or not work at all depending on the developer.
the developers would have to make a different copy of the device for each user though.
Hello i think your right Dididesign have been alone at the top for along time and thats matter....thats why its so expensiveOn 2001-09-27 03:46, jupiter8 wrote:
There are 3 reasons why there is'nt more high end plug-ins.
1. The platform is to small.
2. Politics. It seems to me like Waves for one has some agreement with Digidesign not to release their Plugs for a competing system. I don't know this but it's a feeling i have.
3. PIRACY. Like stated above, Quantec have a killer reverb for Pulsar but won't release it because of the copy protection (or lack of) on the Creamware cards.
BTW. There must be a fool proof copy protection. There must be. I have some ideas on how it can be done but i'm not sure. I've read some on how they crack the devices but there mist be a way around it, i'm sure.
About the copyprotection(i´m not an expert)
But i think that the guys at creamware is a little bit younger and smarter..they know how easy it is 2 crack a program.The way with challengecodes that is regged just for a spesific card is smart,for a while
But of course everything can be cracked .BUT the point is that comanys like waves. tc .Bombfactory blames creamware for bad protection...IS BULLSHIT.They are afraid
of getting into trouble with Digidesign.
But hey!The thing with buissness is 2 make money!And Creamware is a hit. and if it`s possible and no license aggrement who binds them,I think they do a bad buissness.And i dont think they are interested in losing money so hopefully they will release them as soon as possible(if possible)
PLAY IT LUOD!
-SEZAM-
That's what I said, the private key, the one you need to decode something what's encrypted should be burned into the card, the public key is known to developers and your id. Now when you order your program it will be encrypted with your public key and it can only be decrypted when loaded with your card.On 2001-09-30 20:42, defex wrote:
All the unique keys in the world will not do any good when the crackers just alter the program to say "yes, the key is correct"
I think you might be able to do it by having a value in the DSP code which is different for each user, the device can work in demo mode (beep or something) or not work at all depending on the developer.
the developers would have to make a different copy of the device for each user though.
As much as it would be great to have the likes of Lexicon supporting the Creamware platform, I'm not sure I agree that it's what is needed to compete with the likes of Pro-Tools. Besides, if Lexicon, for instance, were to recreate one of they're reverb units as a Pulsar/Scope device how much dsp power would it use...too much is my guess. The CW platform in my opinion already has a fine crop of developers and in many cases the devices speak for themselves. It's just a shame that so many users would put their trust in a brand name ahead of their own ears.
I'm not really looking for the perfect reverb, what i want is all over Pulsar: it's a very flexible platform, which gives me the freedom and possibilities to do all kinds of weird effects and chains, which make it's unique sound. Use creativity above 'neat in-line studio'


more has been done with less
https://soundcloud.com/at0m-studio
https://soundcloud.com/at0m-studio