Page 6 of 6
Posted: Tue Aug 15, 2006 10:53 am
by okantah
Hi gustav
Have you solved the problems on the Asus p5wd-2premium mobo? if so,please i like to bother you to send both the BIOS configurations & the ide connections here.
I was advice to have that mobo.& im having similar problems just like yours.
Okantah thanx
Posted: Tue Aug 15, 2006 11:03 am
by gustav
I have not solved this problems - when its done (ever) then i will send you my solution for sure
If there are other P5WD2 users - I invite them to have a look - perhaps they can help ...
Posted: Tue Aug 15, 2006 11:08 am
by Shroomz~>
What size & type is your power supply? (by size, I mean how many 'watts')
<font size=-1>[ This Message was edited by: Shroomz on 2006-08-15 12:09 ]</font>
Posted: Tue Aug 15, 2006 11:08 am
by okantah
gustav
Thanx for your ugent reply,& why is Creamware still recommend this board ?
i have send you private post,no need to reply
okantah
Posted: Tue Aug 15, 2006 11:30 am
by gustav
Posted: Tue Aug 15, 2006 11:47 am
by Shroomz~>
mmm, that should do the job without a problem, so its likely not to be that at fault (your mobo is 400-450W minimum for stable running which is why I asked)
Posted: Tue Aug 15, 2006 12:57 pm
by okantah
gustav do mean the problem is solved from this power supply?
please more details.
thanx
Posted: Tue Aug 15, 2006 2:06 pm
by gustav
No the problem is not solved.
But i think with all the clean install and tweaking I've got a more stable system.
My last tests show clearly a problem with this sts5000. Same Cubase file - SFP project with the only difference : sts5000 or B2003
sts5000 always ends up with hanging up windows.
b2003 is running without end, no way to bug it down. In the end I tried heavy editing while playing - stable.
whats so different in the sts5000 ?
Posted: Mon Aug 21, 2006 9:24 pm
by tgstgs
its combination sts - sx !!
with another sequenzer i dont have trouble same file; midi - loops - sts - sx or nuendo isnt a good idea;
Posted: Mon Sep 18, 2006 8:33 am
by gustav
On 2006-08-13 10:57, Shroomz wrote:
Take it one step at a time would be my advise. Don't connect up lots of midi gear until you've got a clear picture of what may be the problem. For example, if you suspect STS to be the problem, I'd do some serious testing without STS involved. If you have no problems until adding STS into the picture, then you'll have found the source, if not, you'll have eliminated a possible suspect.
since this post, I worked with projetc where I removed the sts. I had no windows hanging until now, and this time it came when looping around a bass - drum thing and playing a long solo on my midi keyboard that is connected to the pulsar midi in port => cubase => back to sfp into the pro-12.
so the problem is not solved, is not limited to the sts - do you have any suggestions of what i can trie ?
Posted: Wed Sep 20, 2006 8:27 am
by okantah
Asus p5wd-2premium mobo ???.
It's still problems here with the STSs which i can not miss in my scope settings,
without the STS it's working fine,
My problems still on board.
some days ago these was some reactions:
ali
Pulsar Geek
Hi Ali why is it so difficult to have contact with Andre ?
I think his advice for the Asus p5wd2-e premium is more of COMPROMISED to Creamware products,sts crushies all the time.
He's also not available just to inform his customers about complains base on his recommendation.what exactly is the reason & he's advice on his configurations both hardware & the BIOS may be might help.
okantah
http://www.planetz.com/forums/viewtopic ... forum=1&24
Joined: Feb 16, 2004
Posts: 157
From: Creamware USA & Canada
Posted: 2006-08-18 14:16
--------------------------------------------------------------------------------
okantah, contact andre and ask how he has his system configured.
Also check out this link by Marc de Ruiter
he got the same mainboard
http://www.planetz.com/forums/viewtopic ... orum=19&16
[ This Message was edited by: ali on 2006-08-18 14:16 ]
Posted: Wed Nov 01, 2006 8:21 am
by gustav
hello Ali,
When clicking on the last 2 links - I get a blank page with the only text : Hacking attempt!
I agree with okantah that the help of Andre would really be appreciated
Posted: Wed Nov 01, 2006 8:59 am
by okantah
Hi gustav
i have recieved your post last time but my internet line was disconnected due to delay payment,it's back today.i would look for time to reply you soon please forgive me!
My system work 100% now since i did the pc.stardard installation 2weeks ago,no no nothing else negetive.
The asus wd2-e premium maybe works only on pc.stardard installation .
gustav i would get to you soon.
Thanks a lot to all planetz contributors.
Espectially thanx to Ralf for his post,
okantah
cheers
Posted: Wed Nov 01, 2006 12:18 pm
by garyb
i've built a couple with that mobo in acpi mode that have been ok. glad yours is working now, however.
Posted: Wed Nov 01, 2006 1:37 pm
by okantah
Thanx garyb
the acpi mode ! im yet to find out