Page 1 of 1
Posted: Fri Jun 29, 2001 1:23 am
by Matt
Recently whenever I have recorded a midi part to a stereo audio track in logic the 'asio out' level in the Big mixer has a stronger signal on the right channel as opposed to the left. For no reason that I can find, all my pan sliders are set correctly etc? Can anyone shed any light on this? I am using a Fostex VC8 to convert the signal from my hardware.
Thanks
Posted: Fri Jun 29, 2001 8:05 am
by subhuman
Make sure any input gains are set the same; make sure you're properly sync'd to the VC8; If you still have problems, try checking the inputs in pulsar directly with a VU meter (free one on PlanetZ Devices Area), to see if it's happening right on input, or somehwere inbetween (like BugMixer setting that's not showing properly maybe), I have this feeling you'll see the issue on input from the VC8 though..
Posted: Fri Jun 29, 2001 2:52 pm
by Rene
I always have the same problem with Cubase. Then I have to open the Mixer in Cubase and just click on the faders (...just one click). Afterwards the levels in Pulsar are the same again!