Posted: Fri Sep 17, 2004 9:29 am
i have uploaded a bunch of new samples on my site
http://www.alchemystudio.it
(go to free samples section)
"Mighty Hits" (5.5MB) (a short mp3 demo will follow soon)
(looking for creating something similar to the film-score-percussions...
)
i copy here the readme you will find in the zip file:
The samples were obtained from a self recorded sound (the included HIT1.WAV) in my cellar.
HIT1.WAV was imported in kontakt (2 layer panned mid-left and mid-right, slightly detuned of some cent), tuned to -24 semitones.
routing matrix:
velocity -> sample tuning (high velocity=slightly higher tune)
-> parametric EQ (1 band): freq set to 3000Hz, Q=2. velocity controls the gain (higher vel=higher gain)
-> envelope attack (lower velocity=slower attack curve)
key position -> microtuning
kontakt out was directed to :
1) VST Dominion (http://www.digitalfishphones.com)
2) SIR impulse heavy reverb (www.knufinke.de/sir) using an impulse found on http://www.noisevault.com (ChapelDoubleSpdPlusConcertgebouw.wav)
3) timeworks equalizer
4) Creamware PsyQ (www.cwaudio.de)
5) Creamware Optimaster
the resulting output was sampled in Sonar 2 in 3 velocity splits and 4 variations (different keys) and then imported again in kontakt in a new patch.
if you don't have kontakt, you can still import the wave in your sampler or use them in your sequencer by importing them
enjoy and post comments!
_________________
edit: you can listen the demo at
http://www.alchemystudio.it/freesamples ... s_Demo.mp3
<font size=-1>[ This Message was edited by: bosone on 2004-09-17 14:54 ]</font>
http://www.alchemystudio.it
(go to free samples section)
"Mighty Hits" (5.5MB) (a short mp3 demo will follow soon)
(looking for creating something similar to the film-score-percussions...
)i copy here the readme you will find in the zip file:
The samples were obtained from a self recorded sound (the included HIT1.WAV) in my cellar.
HIT1.WAV was imported in kontakt (2 layer panned mid-left and mid-right, slightly detuned of some cent), tuned to -24 semitones.
routing matrix:
velocity -> sample tuning (high velocity=slightly higher tune)
-> parametric EQ (1 band): freq set to 3000Hz, Q=2. velocity controls the gain (higher vel=higher gain)
-> envelope attack (lower velocity=slower attack curve)
key position -> microtuning
kontakt out was directed to :
1) VST Dominion (http://www.digitalfishphones.com)
2) SIR impulse heavy reverb (www.knufinke.de/sir) using an impulse found on http://www.noisevault.com (ChapelDoubleSpdPlusConcertgebouw.wav)
3) timeworks equalizer
4) Creamware PsyQ (www.cwaudio.de)
5) Creamware Optimaster
the resulting output was sampled in Sonar 2 in 3 velocity splits and 4 variations (different keys) and then imported again in kontakt in a new patch.
if you don't have kontakt, you can still import the wave in your sampler or use them in your sequencer by importing them
enjoy and post comments!
_________________
edit: you can listen the demo at
http://www.alchemystudio.it/freesamples ... s_Demo.mp3
<font size=-1>[ This Message was edited by: bosone on 2004-09-17 14:54 ]</font>