Page 1 of 1
Posted: Thu Oct 21, 2004 9:42 am
by Alfapitcher
Hi! I will soon recive a pulsar2 card that I will add to my Luna2. Im wondering how I should proceed. Should I uninstall everything first or can I just plug my new card in? Another potential issue is the fact that I will have the Modular3 synth connected to the Luna registration file and the Prodessey connected to the Pulsar regfile. Will this be a problem?
regards Henrik
Posted: Thu Oct 21, 2004 9:57 am
by wayne
hi Henrik
- just plug it in!
try to have it sharing an irq, strap on an S/TDM cable, and all your devices will load on a 9 DSP system
pci slots 2 & 5 seem popular....
Posted: Thu Oct 21, 2004 11:52 am
by Guest
Simply add the card and connect it to your luna via the STDM cable. boot your system it ask for a driver, install it.
then proceed to install the Pulsar software on top of the luna so you can gain all the extra plugins.
good IRQ's are 5/9/10 or 11
just make sure neither card is sharing IRQ with other devices and specially the video card.
<font size=-1>[ This Message was edited by: antar on 2004-10-21 12:54 ]</font>
Posted: Thu Oct 21, 2004 7:52 pm
by hubird
............... ' I never shared anything in my life '