PlanetZ forums - scopeusers.com

I would be much happy one if all the users of planet z answered to this question:
How much power have your system?
Which CPU and many DSP have your system?

I have P4 HT 3.6 and 2 Power pulsar + scope SRB
total 45 DSP

Thanks in advantage

best regard

Daniel from italy

21 DSPs
2Ghz / AMD / Hammer

Host: AMD Athlon64 3500 Mhz -> 15+3= 18 DSP

Synth: AMD AthlonXP +2400 Mhz -> 6+6+4=16 DSP

I am done with this setup beacuse I prefer to play and "freeze" one track once.
I use Host in XTC mode (FX, masternig, recording) and Synth as external MIDI rack with synths like i.e. Solaris (max 5-6 voices) or Minimax (max 16 voices).
The "synth" PC is also used as ADAT recorder for the final mix (I prefer scope mixer summing instead Cubase's algo) & mastering.

Howewer, if in the future Scope Pro becomes cheaper than today, why not switch all 2 systems to 45 DSPs ?!

15 + 15 + 6 = 36 DSPs
3.01Ghz INTEL 2xCPU + 2GB-Mem Windows-PC

15 DSP + 6DSP
Core2duo E6600 (2,4 Ghz)
4 Go ddram super Talent on an Intel motherboard

Jonathan

3 Pulsar One - 12 DSPs
Pentium III 1.2G Tualatin
512 MB SDRAM 133 Mhz

cheers, Tom

AMD 64 FX-55 single core O.C'd. 2.852 GHZ....Air Cooled
MSI socket 939 SATA 2...pci / agp
2 gigs OCZ low latency DDR PC3200....timings(2,3,2,5)
Antec Sonata Case (quiet fans)
Windows XP pro SP2
Touch screen flatpanel...bye bye mouse...
52 in/ 24 out light pipe 2 midi universes

Scope Home + Power SRB = 3 + 15 = 18 DSP

NOAH Ex = 10 DSP

AMD 3200+ 994 Mhz / 512 Mo RAM

- 3 PowerPulsars = 45 DSP
- processor Intel E6700
- 4Gig CORSAIR

cheers

Michel

19 DSPs
(Scope + Pulsar)
Intel Quadcore @ 2.4 GHz

Commodore 64
6502 CPU
64KRAM
1 x SID chip

18 dsp here

AMD Athlon 64 3200
1x Pulsar 1 + 1x Powersampler + 1x Pulsar 2 = 13 DSP's

it's not enough!!!

A small update...

Well the 15 DSP SRB + the 3 DSP home are still there. The 11 DSP of the NOAH Ex also.
But some other cards joined the team:
- 1 x 3 DSP Luna
- 1 x 4 DSP Pulsar 1
- 1 x 4 DSP Pulsar 1 SRB
- 1 x 6 DSP Pulsar II
- 1 x 3 DSP Elektra
so the total is reaching 38 DSP now (+ the 11 DSP of the NOAH)


Plus a few others:
- 1 mono DSP Plugiator
- 1 dual DSP Minimax ASB
- 1 dual DSP Pro12 ASB

The road is still long to reach the 150 equivalent DSP of the Xite-1 ...

CheerZ

2 scope and 1 pulsar2 = 36 DSP
i had a E8400 CPU in there but i took it out and replaced it with a pentium core 2 5200 which can run with no fan (with a big enough heatsink)
and its plenty fast enough for scope.


the sequencer has a xeon 3210 (something like that equivelant to a Q6600,)

sequencer has EMU1212 for ADAT connection to scope(its about the cheapest card with ADAT i could find.)

both with 4 GB RAM

audio computer -

2 x Pulsar XTC + 1 x Luna II = 15 DSP
Pentium 4 2.8 HT (Standard PC mode)
Abit IC-7 (875 chipset)
2gb RAM
ATI Radeon 9600
WD HDD 160GB

sequencer = Steinberg Cubase 4 Essential



second computer -

1 x Luna II
Celeron 3.0D (Standard PC Mode)
Asus P4C800 (875 chipset)
2.5gb RAM
Asus Nvidia GeForce 7600GS
3 x WD HDD (630GB)

Steinberg V-Stack

Scope/sdk DAW

ASUS AN78X deluxe
AMD Athlon XP2200+
1 GB ram
Scope Pro + Pulsar II = 20 dsps
needs updating, but it works great & has always been a flawless system.

Our second Scope system is an old P3 with 6 dsps & is even slower. (but it works)

~Mark

See my signature.

P.L.U.R

Pulsar 2
Intel Core 2Duo 6400
UAD2 Duo

1 Scope pro II + 1 Scope pro I = 29 DSP
A16 ultra via ZLink
TC Electronic Konnekt24d in standalone via ADAT
+ some music hardware

Computer:
Intel Quad Q6600 @ 3GHz
Crucial 2x1GB RAM
600 GB RAID0 SATAII
400 GB RAID1 SATA
Geforce 8800GT

Cubase & Wavelab