Page 1 of 1
					
				Create wavetable
				Posted: Wed Dec 13, 2017 11:29 am
				by frokka
				Is it possible to create a wavetable within the Scope SDK?
Or can I use an external tool to do it and use that wavetable in Scope?
			 
			
					
				Re: Create wavetable
				Posted: Wed Dec 13, 2017 11:58 am
				by RA
				Now this is one i am anxious about!
I know that a wave table is an array which you can edit, and fill with 131 values.  
 
  
 
			
					
				Re: Create wavetable
				Posted: Wed Dec 13, 2017 12:03 pm
				by w_ellis
				sharc definitely managed to get somewhere with this. Check this post: 
http://www.bcmodular.co.uk/forum/viewto ... f=13&t=287 
			
					
				Re: Create wavetable
				Posted: Sat Dec 16, 2017 8:21 am
				by Spielraum
				yep, on wishlist:
viewtopic.php?f=30&t=35297
VECTRON v7 morphable wavetable
or other tool example in MODULAR 

MIDI CTL X/Y and modulated
 
			
					
				Re: Create wavetable
				Posted: Sun Dec 17, 2017 2:38 am
				by astroman
				imho Vectron is more into the wave-sequencing direction (like the Wavestation), not wavetables the PPG way.
It sounds similiar for the basic sounds are based on that famous Waldorf wavetable set.
Some years ago someone posted a huge amount of single cycle waveforms that could be loaded into Vectron iirc.
Not exactly intuitive, though, as is the whole sound import process into Vectron.
Since W. Palm revitalized his efforts in the IOS domain, I didn't bother much about other sources.
His solutions for iPad are great, yet rarely understood. 
Everyone likes the sound, but only few understand what wavetables are about, according to comments in various boards.
You may check Wolfgang's (extensive) videos about WaveGenerator on YouTube for reference.
He's a bit long winded, but there's a lot to be learned about the details of the processing engine and tweak approches.
cheers, Tom
			 
			
					
				Re: Create wavetable
				Posted: Mon Dec 18, 2017 10:15 am
				by dante
				Whats the difference between wavetable and sampleosc in Modular 4 ?
			 
			
					
				Re: Create wavetable
				Posted: Mon Dec 18, 2017 1:54 pm
				by roy thinnes
				SampleOsc? I think you meant WavetableOSC?
In Scope, we have several resources for Wavetable Synthesis:
- the Vectron Synth, which is based on the Prophet VS (Seq.Circuits, Dave Smith, John Bowen),
- the Wavetable OSC in Modular, and 
- the Waldorf OSC, also in Modular
--Vectron uses (almost) the same wavetables as the Wavetable OSC (127) + has the ability to use own wavetables (also 127); the oscillator mix can be modulated in various ways.
--in Modular's Wavetable OSC you can't use your own Wavetables
--Modular's WaldoOsc is using 64 sets of wavetables, each set has 64 variations of one waveform. You can blend between these variations by using any modulation source.
---PPG (Wolfgang Palm1980)-> Wavetable Synthesis->Wave2(1981)-->Waldorf-->Scope WaldorfOSC
---SeqCircuits(DaveSmoth/JohnBowen1986)->Prophet VS-->Scope VectronSynth
----Scope SDK availability: 
Waldorf OSC  
 
 
Wavetable OSC  
 
 

 
			
					
				Re: Create wavetable
				Posted: Mon Dec 18, 2017 2:12 pm
				by dante
				Sounds like the waldorf OSC is the way to go.  Would it be possible to make a sample osc loadable wav file out of a wavetable ?  Or totally different animals ?
			 
			
					
				Re: Create wavetable
				Posted: Mon Dec 18, 2017 3:33 pm
				by roy thinnes
				sampleOsc=one shot wave
wavetable=periodic waveform (rather tiny, only few ms)
(of course you can make wavetables into samples by sampling and looping though)
--
and yes, if someone is able to make a wavetable synth with own wavetables it's sharc.
but Vectron already is quite perfect ...
			 
			
					
				Re: Create wavetable
				Posted: Tue Dec 19, 2017 2:39 pm
				by Spielraum
				roy thinnes wrote: Mon Dec 18, 2017 3:33 pm
and yes, if someone is able to make a wavetable synth with own wavetables it's sharc.
but Vectron already is quite perfect ...
 
YES, HAMMERTEIL!
like the edit buffer function, it´s fantasic morphyfun
now additional wish 2:
Vector-Dynamic_Record with quantization to vector env points, see wishlist
> post 2
viewtopic.php?f=30&t=35297
these two features together with wavetable/sample import vectron would be unbeatable   
 
			
					
				Re: Create wavetable
				Posted: Wed Apr 17, 2019 6:30 am
				by faxinadu
				we use the wt in our synths as well, but these are all locked modules, there is no way currently to inject new tables into these modules.
			 
			
					
				Re: Create wavetable
				Posted: Wed Jun 12, 2019 12:22 am
				by at0m
				I do have a "wavetable recorder.mdl" and ArrayEditorFlt.mdl for the WT's in my SDK folder, but where these come from.. not sure if they can be distributed. May have to ask around.
Also, John Bowen's Red Dwarf modules have WT with audio that ranges from a few bytes up to nearly 1MB. So I guess these are loaded to RAM, not DSP memory. And he, had to make them one day.
So either these WT's are done using extra atoms that they made or CW provided  out of band, or they should be in the standard pack.
			 
			
					
				Re: Create wavetable
				Posted: Wed Jun 12, 2019 1:07 am
				by faxinadu
				woah i don't have those, any way you can share?
			 
			
					
				Re: Create wavetable
				Posted: Mon Jul 29, 2019 1:30 am
				by Spielraum
				at0m wrote: Wed Jun 12, 2019 12:22 am
not sure if they can be distributed
 
pleace give scope sdk nerds a change and share the cool stuff
for more stars in our milky way which can see through a scope
 
