Page 1 of 1
Posted: Tue Jun 26, 2001 8:35 am
by Warp69
Hi,
There have been some talk about switching devices off and unloading the DSP's - Why not use the 'Dyn Voices Of Parent' module??
'0' - Switching the device off and unloading the DSP's.
'1' - Guess what
Or am I missing something???
Cheers
Martin
<font size=-1>[ This Message was edited by: Martin Lind on 2001-06-26 23:07 ]</font>
Posted: Tue Jun 26, 2001 12:09 pm
by kimgr
Hi Martin. Nice to see a fellow /DP user from Denmark, there aren't that many of us
(4 as far as I know)
Anyway, I didn't know that the 'Dyn Voices Of Parent' module could go below one ?
<font size=-1>[ This Message was edited by: kimgr on 2001-06-26 13:10 ]</font>
Posted: Tue Jun 26, 2001 2:00 pm
by Warp69
Hi Kim,
Since you post the thread regarding protection, I imagine that your synth is almost finished
Maybe we should continue in danish
Cheers
Martin
Posted: Tue Jun 26, 2001 9:40 pm
by John Bowen
Hi,
Yes, you use the 'Dyn Voices Of Parent'.
I usually use an IF module, and set it to send a 0 if you want it disabled, and a -1 if you want it to use the polyphony set on the Preset List (sending a 1 makes it monophonic, of course, which I will use for things like effects that come after the Poly 16 module).
<br>
Regards,
John Bowen
Switching devices off
Martin Lind
Budding Pulsarian
Joined: Jun 18, 2001
Posts: 12
Posted: 2001-06-26 09:35
Hi,
There have been some talk about switching devices off and unloading the DSP's - Why not use
the 'Dyn Voices Of Parent' modul??
'0' - Switching the device off and unloading the DSP's.
'1' - Guess what
Posted: Wed Jun 27, 2001 3:51 pm
by demille
hi all
note that the "Dyn voice of parent"
doesnt work for devices loaded in an insert mixer....
http://www.azymute.com
Posted: Sun Jul 01, 2001 8:44 am
by spacef
no no, it does work inside inserts. may be put it inside the inside of the insert effect. i would even say it works perfectly
<font size=-1>[ This Message was edited by: spacef on 2001-07-01 09:46 ]</font>
Posted: Fri Jul 06, 2001 7:02 am
by onomat
Huh guys? What is this switch EX?
I do not have it with my Scope /DP...
Please reply..
Sayton
De-Vice'
Posted: Fri Jul 06, 2001 7:32 am
by John Cooper
On 2001-07-06 08:02, onomat wrote:
Huh guys? What is this switch EX?
I do not have it with my Scope /DP...
Please reply..
hey simon!
welcome to the forums (i'll go reassign your earlier device posts that are currently listed as anonymous to onomat)
so, are you posting this switch ex question in the wrong thread? are you referring to <a href="
http://planetz.ghostwheel.com/forums/vi ... 11&4">this discussion</a>?
anyway, i have a signal switch ex atom in my switches directory. it lets you specify whether it's a one in to many outs switch or many ins to one out switch. and it lets you choose how many is many
if you're missing it, i can email to you.
-john
Posted: Thu Jul 12, 2001 3:57 am
by onomat
Hi!
This is the forum I wanted...
I've had my Scope for 2 years now and I definitely don't have any switch EX.
Would be great is you could email it to me @
simonayton@hotmail.com
What else am I missing I wonder?
I am using Scope 1.2 is this current? I have been told it is.
Cheers all
ps. This forum is a obviously a much needed and great thing...
Posted: Thu Jul 12, 2001 10:49 am
by demille
On 2001-07-01 09:44, spacef wrote:
no no, it does work inside inserts. may be put it inside the inside of the insert effect. i would even say it works perfectly
<font size=-1>[ This Message was edited by: spacef on 2001-07-01 09:46 ]</font>
in fact in the bigmixer'pulsar'
when you switch the inserts on/off the dsp meter doesn't change
now if you delete the audio input cable of these channel the inserts devices loaded are unload form dsp's !!!!!
then the switch on bigmixerV2 is just a bypass.....
http://www.azymute.com
Posted: Fri Jul 13, 2001 1:26 pm
by John Cooper
On 2001-07-12 04:57, onomat wrote:
Would be great is you could email it to me @
simonayton@hotmail.com
What else am I missing I wonder?
i mailed it to you, along with a directory listing of my scope circuit design folders...
-john
Posted: Fri Jul 20, 2001 11:51 am
by spacef
about switching inserts off.
Yes may be you are right it is something that happens in the Big Mixer, i've heard about this before. But in an insert rack for ex, it seems to work fine .
Posted: Wed Aug 29, 2001 10:30 pm
by madmod
Hi Simon,
Ive got version 1.32 of scopeDP
are you still in Melbourne???
if so I will give you a copy
or email Greg at Major..or CW
Regards
Posted: Fri Aug 31, 2001 2:10 am
by huicholity
Hi,
you talked about Scope DP 1.32 ??? (i was thinking the latest was 1.31 before the XTC DP)
...do you have more infos about this one ?
best regards,
Posted: Tue Sep 04, 2001 6:14 am
by madmod
ooops 1.31
Posted: Tue Sep 04, 2001 10:28 am
by demille
huicholity don't panic ......
u hav the latest version
:=)