Page 1 of 1
6dsp card with 14dsp card with no i/o does it work
Posted: Tue Mar 02, 2010 12:32 pm
by tripstation
Has anyone tried this?
Used to have a scope pro card.
Could never get it to work in XTC mode with no i/o.
People on the forum have got the 6 DSP card working with by shorting a jumper (which one ?)
Now, if you connect a 14 DSP card to a 6 DSP card via a STDM cable.
Then short out the jumper on the 6 DSP card for using the I/O on say protools or another sound card.
Does it work?
Can someone try this please!
regards,
James
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Tue Mar 02, 2010 12:34 pm
by tripstation
oh no.
There is a double post.
how did that happen?
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Thu Mar 04, 2010 3:41 am
by Me$$iah
A double post.... and in the wrong forum.....
How did that happen.
Bad day on the intartubes eh??
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Thu Mar 04, 2010 5:40 am
by grappa
Hi,
I have a 14 & 6 dsp card connected via STDM used in conjunction with a Yam DS2416. Connecting pins 2&3 on the Pro card allowed both cards to be used in XTC without i/o.
If you search the forum there is a link to a document detailing getting the best out of XTC mode which details the above.
Si
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Thu Mar 04, 2010 7:57 am
by tripstation
Can the 14DSP card be used on its own in XTC mode without I/O by connecting pins 2 and 3?
Have you tried this?
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Thu Mar 04, 2010 8:01 am
by tripstation
Hi,
what forum should this post be in then.
Also what is the search string to find the thread you are referring to?
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Thu Mar 04, 2010 12:30 pm
by grappa
This will do the trick:
http://forums.planetz.com/viewtopic.php?f=32&t=21703
Yes a 14 dsp card can be used by shorting the same pins - you can then use it for XTC only.
Si
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Thu Mar 04, 2010 11:16 pm
by Me$$iah
tripstation wrote:
what forum should this post be in then.
hehehe sorry ... just razzing ya.....
Re: 6dsp card with 14dsp card with no i/o does it work
Posted: Fri Mar 05, 2010 12:36 am
by tripstation
He he.
I'm getting the feeling that scope cards still have a problem when running in a real dual processor system, especially with other cards like a Protools HD core, Powercore and UAD all at the same time.
I had problems before with my Asus PC-DL.
I might stay away from Scope until the problems are fixed.
I was hoping that they would be fixed in Scope 5.
Am I wrong?